How to update Bixolon Printer firmware (SPP-R300/310)
This article steps you through how to update the firmware on your older Bixolon SPP-R300 and 310 printers.
The latest firmware version for this printer is V02.17. You can check your firmware version on the printer by pressing and holding the Power and Feed buttons when the printer is on. A Self-Test sheet will be printed with the firmware version shown on the top.
Step-by-step instructions on how to update the firmware version. Note: you will need administrator permissions on your computer to do this.
1. Download and Install the printer driver: https://www.bixolon.com/download_view.php?idx=86
2. Connect the printer to your computer with the included USB cable
3. Download and install the [attached Unified Mobile Utility for PC and the attached SPP-R300_V02.17 STOBa 061416.fls file.] - to be updated
4. Run the Unified Mobile Utility program
5. Turn on your printer
6. Under Communication Setting > Interface, select USB
7. On the right-hand side, click Firmware Manager
8. Click Start Download and select the SPP-R300_V02.17 STOBa fls file from where you saved it on your computer
9. Wait for the firmware version to install, then you will see the following:
Click OK. You are now good to unplug the printer and use as before.
Related Articles
How to Add QR Codes to Bixolon Tickets
>> QR codes are there so that violators can scan and be taken directly to the payment page with violation number and plate number already selected >> It will still show all outstanding violations (not courtesy or warning notices) >> Only for Bixolon ...How to Update a Notice Letter
Step 1: Use the NIC template you have on file to revise the letter to incorporate any changes. Step 2: Login to the Roker admin portal. Step 3: Select Violations, and under settings, select general settings (highlighted below in GREEN): Step 4: Once ...Update Permit Location Pricing
Overview This article will provide details on how to update permit location pricing. View a step-by-step video tutorial here: Step 1: Login to Roker Admin Portal. Step 2: Select "Settings" on the toolbar, and under the page dropdown on the left side, ...How to set up Zebra printers
The Zebra printer must be configured and set up before it can be used with the Roker Patrol app. Follow the instructions below to set up your printer and device. 1. Download Zebra Printer Setup Utility On your mobile device, open Google Play Store ...How to Issue Violations
How to Issue Violations This article will provide patrollers with a step by step guide on how to issue validations. 1. Scan plate. 2. Review the plate, and select "Issue violation" Note: You can view active sessions at different locations by clicking ...